Product Description
MS-10 uses the magnetic field characteristics of magnetic compass pointer, converts the pointer reading into electrical signal through magnetic induction element, outputs NMEA-0183 standard heading statement, and calculates the output of rot value, so that the magnetic compass that can only be identified by human eyes can be connected with radar, autopilot, repeater, AIS and other navigation equipment requiring bow information.
Features
●Support on-site quasi learning and reduce the error in use.
Parameters
● Angle conversion accuracy：1.0°
●Angular resolution：0.1°
●Output port：1 ports，RS422/485；rate 4800、9600、19200、38400 Set up.
●Output statement：IEC61162，NMEA0183，HDT，ROT，Configurable .
●Output rate：1，5，10Hz Selectable .
●Configuration input：1 ports，RS422/485；Various configurations can be completed through MS-10 display (option).
●MS-10 display is an optional part of MS-10, which shows the indication of heading and rot. at the same time, it can complete various configurations of MS-10 sensors, and all operations are completed by two keys.
●Installation offset can be corrected，Range -9.9°～+9.9°
●Support on-site calibration, input an error source every 15 °, can greatly improve the output accuracy, and the calibration operation is simple.
●Power Supply：DC24V，18-36V.
●Power waste：<1.5W
●temperature range：Use -30°C～+70°C；storage -40°C～+85°C
●Waterproof grade：IP65
●weight：800g
●diameter 66mm height 46mm。
