Product Description

  DSC-10B digital NMEA step-by-step compass converter receives and displays NMEA-0183 bow azimuth signal, and converts it into step-by-step compass signal output. The supported input statements are: $xxhdt, $xxhdm, $xxhdg, $xxhsc. The output drive voltage and drive ratio can be set to drive most of the step compass equipment. Dsc-10b supports up to 6-8 similar step-by-step Gyrocompasses.

  DSC-10B also has the function of master-slave compass switching. It is suitable for the application of dual compass through manual selection.

Features

●NMEA-0183 Input: 1 port, Supports HDT, HDM, HDG, HSC sentences.

●Synchro/step input:1port,Support master and slave compass switching function.

● Automatic baud rate recognition:range 4800-38400bps.

●Synchro/step output:Support for driving up to eight same repeater.

●With 4 digital LEDs,Support offset elimination and setting operation.

●Repeater ratio can be set from 36X to 360X.

●The excitation voltage and drive voltage is selectable.

●Input power 110 VAC or 220 VAC,different in wiring.

●Support master/slave compass switching,especially suitable for double compass back up System with one satellite compass and one gyro compass. 

●Short lock time,no cumulative error.